China Inch TXT (SMRY) -6 Shaft Mount Gearbox Shaft Mounted Reducer shaft collar bracket

Solution Description

SMRY Reducer Specification
 
 
1 Twin Tapered Output Hub
A  tapered  bore   in   both   sides   of   the reducer’s output hub snugs up against a matching taper on the outer surface of the bushing. Bushing mounting screws pass through the bushingflange into a mounting collar  on  the  hub.  As  the  screws  are tightened,   the    bushing  moves    inward, gripping the driven machine’s input shaft tightly and evenly around every pointon its circumference. It is  easy-on, easy-off. All the Output Bushing Bore accord to ANSI

2 PrecrisioHigh Qua  lity Gearing
C ompu ter D e s i g n He lical .Gears, Robust Alloy Materials for High Load Capability, Situation Carburized for long life, Ground Profile Crown tooth Profile, In
Conformance  with  ISO  1328-1997,  98%  Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.
3 Maximum Potential Housing Layout
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Attributes, Precision Bored and Dowelled to Guarantee Exact In-Line Assembly.
4 Strong Alloy Steel Shafts
Sturdy Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions,for Maximum Load and Maximum Torsional Loads. Generous Dimension Shaft
Keys for Shock Loading .
Use adapter for mount the torque arm, increase the strength of the gear case, the torque armeasy-on and easy-off and trustworthiness, controls position of standard torque arm mounting within recommended limits.
6 BackStops
Substitute Elements, anti-run back device, are available on all 15:1 and 25:1 ratio units.
seven Bearings and Oilseals
Bearings are all tapered roll bearings(Other than SMRY-2), have long time service time. Oilsealsare Double Lipped Garter Spring Type, Making certain Effective Oil
Sealing.
8 Torque Arm Assembly
For Easy Adjustment of the Belt.

 

size Nominal ratio 15:1 Nominal ratio 25:1 weight
lbs
 
Actual Ratio Optimum Input  rpm Highest Ouput  rpm Actual Ratio Highest Enter  rpm Greatest Ouput  rpm
SMRY-2 14.04 1974 a hundred and forty 23.37 1994 85 58
SMRY-3 14.87 2083 140 24.seventy five 2100 85 98
SMRY-four 15.thirteen 2118 one hundred forty 24.38 2072 85 139
SMRY-five fifteen.4 1925 one hundred twenty five 25.fifty six 2044 eighty 207
SMRY-6 fifteen.34 1916 125 25.14 2571 eighty 285
SMRY-7 fifteen.23 1827 a hundred and twenty 24.84 1863 75 462
SMRY-8 15.08 1809 120 24.62 1847 75 633
SMRY-nine fifteen.twelve 1814 a hundred and twenty 25.66 1925 75 760

size SMRY-2, 3,4,5,6,7,8,9 , ratio fifteen:1 ,25:1

 

Organization Profile

l  The greatest manufacturer and exporter of worm gear reducers in Asia.

 

l  Established in 1976, we reworked from a county owned factory to non-public 1 in 1996. HangZhou SINO-DEUTSCH Electricity TRANSMISSION Products CO.,LTD is our new title given that 2001.

 

l  We are the 1st company of reducers and gearboxes in China who was given export license considering that yr 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the initial owner of CHINA Top Brand name and Most Famous Trade Mark for reducers.

1st to achieve ISO9001 and CE Certification amid all companies of gearboxes in China.

   
As a expert producer of worm gearbox and worm gear reducers in China, we primarily produce reduction gearbox,aluminum scenario worm gearboxes,arc gear cylindrical worm gearboxes, worm gear reducers, in line helical gearboxes, and cyclo push reducers, etc. These products attribute rational construction, steady functionality, and trustworthy top quality, and so on. They are widely utilized in energy, mining, metallurgy, developing materials, chemical, foods, printing, ceramic, paper-generating, tobacco, and other industries.

 

 

   

We have 600 workers in our factory, which covers 70,000 square meters in HangZhou. We have been generating 2,five hundred models of reducers each day because 2012. We are proudly exporting 70% of our products to a lot more than 40 countries all more than the phrase. Our customers appear from Italy, Germany, United states of america, Canada, Spain, United kingdom, Mexico, Brazil, Argentina, Turkey, Singapore and other primary industrial international locations in the planet. thirty% of them are OEM made for immediate companies of other merchandise. 

 

 

 

 

We warmly welcome buyers from other elements of the planet to go to us. Viewing is believing. We are very confident that right after visiting our facility, you will have confidence on our goods. We have the most recent computerized equipments and seasoned staff to guarantee the steady top quality and massive output. We have the most sophisticated specialized and engineering team to support most demanding requirement on common and OEM merchandise.

 

 

 

Searching ahead to conference you in HangZhou, China.

US $198
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industry
Hardness: Hardened
Type: Circular Gear
Size: 2-9
Ratio: 15:1 25:1
Material: Cast Iron

###

Customization:

###

size Nominal ratio 15:1 Nominal ratio 25:1 weight
lbs

 
Actual Ratio Maximum Input  rpm Maximum Ouput  rpm Actual Ratio Maximum Input  rpm Maximum Ouput  rpm
SMRY-2 14.04 1974 140 23.37 1994 85 58
SMRY-3 14.87 2083 140 24.75 2100 85 98
SMRY-4 15.13 2118 140 24.38 2072 85 139
SMRY-5 15.4 1925 125 25.56 2044 80 207
SMRY-6 15.34 1916 125 25.14 2010 80 285
SMRY-7 15.23 1827 120 24.84 1863 75 462
SMRY-8 15.08 1809 120 24.62 1847 75 633
SMRY-9 15.12 1814 120 25.66 1925 75 760
US $198
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industry
Hardness: Hardened
Type: Circular Gear
Size: 2-9
Ratio: 15:1 25:1
Material: Cast Iron

###

Customization:

###

size Nominal ratio 15:1 Nominal ratio 25:1 weight
lbs

 
Actual Ratio Maximum Input  rpm Maximum Ouput  rpm Actual Ratio Maximum Input  rpm Maximum Ouput  rpm
SMRY-2 14.04 1974 140 23.37 1994 85 58
SMRY-3 14.87 2083 140 24.75 2100 85 98
SMRY-4 15.13 2118 140 24.38 2072 85 139
SMRY-5 15.4 1925 125 25.56 2044 80 207
SMRY-6 15.34 1916 125 25.14 2010 80 285
SMRY-7 15.23 1827 120 24.84 1863 75 462
SMRY-8 15.08 1809 120 24.62 1847 75 633
SMRY-9 15.12 1814 120 25.66 1925 75 760

Types of Shaft Collars

Clamp style shaft collars

A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.
Shaft Collar

Set screw shaft collars

Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.
Shaft Collar

Aluminum shaft collars

Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.
Shaft Collar

Stainless steel shaft collars

The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.
China Inch TXT (SMRY) -6 Shaft Mount Gearbox Shaft Mounted Reducer     shaft collar bracketChina Inch TXT (SMRY) -6 Shaft Mount Gearbox Shaft Mounted Reducer     shaft collar bracket
editor by czh 2023-01-13