China Strong and High Quality TXT (SMRY) Shaft Mounted Reducer Inch Size Form 2 to 10 3/4 shaft collar

Product Description

SMRY Reducer Specification
 
 
1 Twin Tapered Output Hub
A  tapered  bore   in   both   sides   of   the reducer’s output hub snugs up against a matching taper on the outer surface of the bushing. Bushing mounting screws pass by means of the bushingflange into a mounting collar  on  the  hub.  As  the  screws  are tightened,   the    bushing  moves    inward, gripping the driven machine’s input shaft tightly and evenly around every pointon its circumference. It is  easy-on, easy-off. All the Output Bushing Bore accord to ANSI

two PrecrisioHigh Qua  lity Gearing
C ompu ter D e s i g n He lical .Gears, Robust Alloy Materials for High Load Capacity, Situation Carburized for long life, Ground Profile CZPT tooth Profile, In
Conformance  with  ISO  1328-1997,  98%  Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.
3 Maximum Ability Housing Layout
Shut  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Attributes, Precision Bored and Dowelled to Make certain Accurate In-Line Assembly.
4 Strong Alloy Metal Shafts
Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions,for Maximum Load and Maximum Torsional Loads. Generous Dimensions Shaft
Keys for Shock Loading .
Use adapter for mount the torque arm, increase the strength of the gear case, the torque armeasy-on and easy-off and reliability, controls position of standard torque arm mounting within recommended limits.
6 BackStops
Substitute Areas, anti-run back device, are available on all 15:1 and 25:1 ratio units.
7 Bearings and Oilseals
Bearings are all tapered roll bearings(Other than SMRY-2), have long time service time. Oilsealsare Double Lipped Garter Spring Type, Guaranteeing Effective Oil
Sealing.
8 Torque Arm Assembly
For Easy Adjustment of the Belt.

 

size Nominal ratio fifteen:one Nominal ratio twenty five:1 weight
lbs
 
Actual Ratio Highest Enter  rpm Highest Ouput  rpm Actual Ratio Highest Enter  rpm Maximum Ouput  rpm
SMRY-2 14.04 1974 140 23.37 1994 eighty five 58
SMRY-3 14.87 2083 140 24.seventy five 2100 eighty five 98
SMRY-4 15.thirteen 2118 a hundred and forty 24.38 2072 eighty five 139
SMRY-five 15.four 1925 one hundred twenty five twenty five.fifty six 2044 eighty 207
SMRY-six 15.34 1916 125 25.fourteen 2571 eighty 285
SMRY-seven 15.23 1827 a hundred and twenty 24.84 1863 seventy five 462
SMRY-8 fifteen.08 1809 one hundred twenty 24.62 1847 seventy five 633
SMRY-nine 15.twelve 1814 a hundred and twenty twenty five.sixty six 1925 75 760

size SMRY-2, 3,4,5,6,7,8,9 , ratio fifteen:1 ,25:one

 

Firm Profile

l  The biggest maker and exporter of worm gear reducers in Asia.

 

l  Established in 1976, we transformed from a county owned factory to non-public 1 in 1996. HangZhou SINO-DEUTSCH Energy TRANSMISSION Products CO.,LTD is our new title considering that 2001.

 

l  We are the first producer of reducers and gearboxes in China who was given export license considering that yr 1993.

 

l  “Fixedstar” brand gearboxes and reducers are the first proprietor of CHINA Prime Brand and Most Famous Trade Mark for reducers.

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in China.

   

 

 

As a skilled producer of worm gearbox and worm equipment reducers in China, we primarily produce reduction gearbox,aluminum situation worm gearboxes,arc gear cylindrical worm gearboxes, worm equipment reducers, in line helical gearboxes, and cyclo travel reducers, and many others. These items attribute rational construction, stable performance, and trustworthy good quality, and so on. They are extensively used in electrical power, mining, metallurgy, creating content, chemical, food, printing, ceramic, paper-creating, tobacco, and other industries.

 

 

 

 

We have 600 personnel in our manufacturing unit, which covers 70,000 square CZPT in HangZhou. We have been producing 2,five hundred models of reducers every day given that 2012. We are proudly exporting 70% of our merchandise to much more than forty nations around the world all over the term. Our customers come from Italy, Germany, Usa, Canada, Spain, British isles, Mexico, Brazil, Argentina, Turkey, Singapore and other major industrial nations in the globe. 30% of them are OEM made for immediate manufacturers of other goods. 

 

 

 

 

 

 

We warmly welcome clients from other elements of the globe to go to us. Viewing is believing. We are really confident that following checking out our facility, you will have self confidence on our products. We have the most current computerized equipments and skilled personnel to guarantee the secure high quality and massive output. We have the most refined technical and engineering team to assist most demanding prerequisite on common and OEM items.

 

 

 

Seeking CZPT to meeting you in HangZhou, China.


/ Piece
|
1 Piece

(Min. Order)

###

Size: 2-9
Transport Package: Standard Export Packing and Wood Pallets Packing
Specification: CE,
Trademark: FIXEDSTAR
Origin: Hangzhou, Zhejiang

###

Customization:
Available

|


###

size Nominal ratio 15:1 Nominal ratio 25:1 weight
lbs

 
Actual Ratio Maximum Input  rpm Maximum Ouput  rpm Actual Ratio Maximum Input  rpm Maximum Ouput  rpm
SMRY-2 14.04 1974 140 23.37 1994 85 58
SMRY-3 14.87 2083 140 24.75 2100 85 98
SMRY-4 15.13 2118 140 24.38 2072 85 139
SMRY-5 15.4 1925 125 25.56 2044 80 207
SMRY-6 15.34 1916 125 25.14 2010 80 285
SMRY-7 15.23 1827 120 24.84 1863 75 462
SMRY-8 15.08 1809 120 24.62 1847 75 633
SMRY-9 15.12 1814 120 25.66 1925 75 760

/ Piece
|
1 Piece

(Min. Order)

###

Size: 2-9
Transport Package: Standard Export Packing and Wood Pallets Packing
Specification: CE,
Trademark: FIXEDSTAR
Origin: Hangzhou, Zhejiang

###

Customization:
Available

|


###

size Nominal ratio 15:1 Nominal ratio 25:1 weight
lbs

 
Actual Ratio Maximum Input  rpm Maximum Ouput  rpm Actual Ratio Maximum Input  rpm Maximum Ouput  rpm
SMRY-2 14.04 1974 140 23.37 1994 85 58
SMRY-3 14.87 2083 140 24.75 2100 85 98
SMRY-4 15.13 2118 140 24.38 2072 85 139
SMRY-5 15.4 1925 125 25.56 2044 80 207
SMRY-6 15.34 1916 125 25.14 2010 80 285
SMRY-7 15.23 1827 120 24.84 1863 75 462
SMRY-8 15.08 1809 120 24.62 1847 75 633
SMRY-9 15.12 1814 120 25.66 1925 75 760

Types of Shaft Collars

Clamp style shaft collars

A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.
Shaft Collar

Set screw shaft collars

Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.
Shaft Collar

Aluminum shaft collars

Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.
Shaft Collar

Stainless steel shaft collars

The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.
China Strong and High Quality TXT (SMRY) Shaft Mounted Reducer Inch Size Form 2 to 10     3/4 shaft collarChina Strong and High Quality TXT (SMRY) Shaft Mounted Reducer Inch Size Form 2 to 10     3/4 shaft collar
editor by CX 2023-03-31