China Bearing Steel Straight-Line Optical Shaft Guide Rail Hard Bearing Machined Chrome Plated Rod Optical Rod diy shaft collar

Product Description

Product Description

Straight line shaft is a merchandise that can be produced into straight line motion since of the guiding function of sliding bearing.

The necessary circumstances of linear motion technique are: simple layout, optimal overall performance, low maintenance price, sturdy materials, high-frequency heat treatment method, precise
Outside the house diameter size, roundness, correct flatness and floor treatment, and so forth.
Design design: diameter 5- 607
The substance of carbon metal
Hardness HRC60 ± two
Hardening thickness
.8 mm – 3 mm
Length -6000mm (if you need far more than 6000mm, we can reverse link for you)
Precision g6
The roughness is within 1.5μm
Straightness 1.5μm 100mm (Rmax)
Other straight shaft types reliable shaft, hollow shaft, threaded shaft, stainless metal shaft
Other supplies bearing metal GCr15, carbon metal forty five#, SUS440C
We are a expert bearing producer in China, high quality bearings can be customized according to OEM and according to your needs

Variety of application

1. The reliable shaft

Usually relevant to industrial robots, as professional measuring devices, health care instruments, precision device resources, aircraft shafts, pneumatic mandrel moving elements.

2. The hollow shaft

With the advantages of decreasing the fat and simplifying the framework of the equipment, the interior measuring wire, compressed air, and lubricating oil and hydraulic oil can be worn yet again.

three, stainless metal shaft

Usually suitable for chemical substances, seawater and so on

Utilized as element of a measurement in the existence of a substance.

Unique processing shaft soon after heat treatment ending, all versions are tough chrome plated automation gear.
 

Special processing

one.The length of the

We can supply straight spools with diameters φ5mm-φ150mm. Maximum duration up to 6000 mm.

When you have special needs for duration, we can meet your processing requirements of distinct lengths.

When you need much more than 6000mm, we can reverse relationship for you.

2. Special processing

When you have unique requirements for processing. These kinds of as thread, with the shaft hole drilling tapping, radial hole drilling tapping, shaft diameter diameter, and so on., we can procedure for you, these particular equipment after heat therapy and tough chromium treatment method, to ensure the precision of items.

Ship your thorough sketches or blueprints to us for quotation and motion, reply to us after you find our factory value best for processing.
 

Comprehensive Photos

Business Profile

ZHangZhoug HangZhou KaiYaDe bearing co., LTD. Is a have many several years experience of linear motion goods professional manufacturers. We specialised in the production of straight axis, linear information, ball screw, linear bearings, linear guide, ball screw finish help, linear manual, CAM follower and of good top quality and aggressive price tag. My business is situated in HangZhou city, zHangZhoug province, shut to HangZhou port and HangZhou city.
Items are broadly utilised in precision machinery, physical fitness equipment, printing machinery, packaging equipment, medical equipment, foodstuff machinery, textile machinery and associated gear. Items market nicely in North America, Western Europe, Australia, southeast Asia, the Center East, South The usa and other locations.

FAQ

one. Are you a manufacturing facility or trading organization?
We are the most competitive value and higher top quality professional makers, has twelve several years of experience.
2. What is your merchandise variety?
Specializing in the manufacturing of straight axis, linear bearings, linear information, linear guidebook, ball screw, linear motion device this sort of as CAM follower.
3. Do you provide OEM&ODM service?
B: of course. Welcome OEM, ODM
four. How can I get some samples?
We are really honored to offer samples. You need to have to spend the freight and some sample price.
five. How is the quality management of your factory?
We uphold the tenet of “good quality is the potential”, we have handed CE certification, we have strict good quality handle processes.
six. How can I get quotation?
You can send beneath quotation or send e mail to us. You can make contact with us directly by TM or WhatsApp and Skype as you like. If you have an emergency, you should phone us at any time.
 

Pay a visit to the Manufacturing unit surroundings

###

###

How to Choose the Right Shaft Collar

A shaft collar is a small, inexpensive machine component that serves a variety of purposes in power transmission. It is most commonly used in gearboxes and motors. It can serve as a mechanical stop, bearing face, or locating component. Its simple design makes it easy to install. Here are some of the most common types and their functions.

Function

Shaft collars are an important part of many mechanical systems. These devices hold mechanical components on a shaft and also help mount shafts on flat surfaces. They are available in many different styles, sizes, and materials. Selecting the right shaft collar is essential in preventing damage to components. Stafford Manufacturing, a leading manufacturer of shaft collars and other related mechanical components, can help you choose the right one for your application.
There are two main types of shaft collars. The first is the Heavy Duty type. It has a larger outer diameter and wider opening. While this may seem to increase holding power, the problem with that is that it can reduce the amount of space the collar has on the shaft. On the other hand, the Thin Line type is similar, but is made with smaller outer diameters. Another type is the Threaded Bore shaft collar. These shaft collars offer exceptional axial holding power, and are designed to protect threaded shafts without causing any damage.
A shaft collar has many uses and is typically used in industrial applications. It can act as a spacer and to stop shaft movement in reciprocating applications. It can also be used to align and position parts of automation machinery.

Types

There are several different types of shaft collars. These components are critical for a variety of applications, and their design plays a large role in the performance of the resulting product. To select the most appropriate collar, designers must consider several factors, including the style, material, bore size, and geometry of the shaft. Many manufacturers provide performance data, and users can contact them for assistance.
There are many different types of shaft collars, which make it important to understand how each one works and what applications they can serve. Fortunately, shaft collars are easy to install and require little maintenance. Whether you need to secure industrial railings or position medical equipment, shaft collars are a versatile component that can be tailored to meet your needs.
One type of shaft collar is the locking collar. This type of shaft collar has a threaded end that is designed to mate with spindle bearings. They offer an increased TIR than standard shaft collars and allow for precise preload control. They also feature slots for spanner wrenches.

Sizes

Shaft collars come in a variety of sizes. You can get a small diameter shaft collar for small equipment, or a large diameter shaft collar for larger equipment. Both styles are made from solid steel, and they come in several thicknesses. You can choose between one-half inch and six-inch collars, depending on your needs.
There are no specific standards for shaft collars, but most manufacturers have similar designs. They’re either single-point faced or double-split, and can be fine or coarse threaded. They’re often used as mechanical stops, bearing faces, or as locating components. Their bore is either fine or coarse, and their outside diameter and width are determined by the shaft diameter.
Shaft collars are commonly found in mechanical and automation equipment. These ring-shaped devices hold motor components, sprockets, and bearings in place. They also allow them to be adjusted and positioned precisely. A shaft collar is often used to connect the end of a shaft to a mechanical stop.
Another type of shaft collar is called a set collar. It has a recessed area for a screw to bite into a shaft. These collars are perfect for holding sprocket hubs, bearings, and spacers. They can also be used as a rigid coupling.

Cost

When choosing a shaft collar, consider its intended application and cost. Some shaft collars are very expensive while others are quite affordable. Choose one that meets the needs of your assembly. If you’re using the shaft collar infrequently, a clamp style or a set screw style may be a better choice. Then, you can easily adjust or disassemble it with just a few tools. If you’re using it more frequently, choose a two-piece shaft collar.
The material of the shaft collar is also an important consideration. Steel and stainless steel are common choices. While both materials are strong and durable, steel tends to have better holding power. However, aluminum shaft collars are lighter and provide better strength-to-weight ratio. The type of material you choose depends on the amount of corrosion protection you need, and whether you’ll need the collar to resist extreme temperatures. If the shaft collar is going to be used in a hot environment, you may want to go with a titanium collar.
There are many different sizes and types of shaft collars. The type of collar you choose depends on the specific application and the system it’ll be used in. Consider the dimensions of your shaft, the material of the shaft, and the length of the shaft to find the right fit. If you’re not sure what size you need, ask a manufacturer for help.

Placement on shaft

In some applications, the placement of the shaft collar can be critical to the overall performance of the machine. The collar’s design must take many factors into account, including material, style, bore size, and shaft geometry. If a user is uncertain of the proper placement of their collar, they should refer to the manufacturer’s website for guidance.
While shaft collars may look simple, they’re actually essential mechanical components that are used in almost every type of machinery. Despite their ubiquitous use in every industry, they are often underappreciated due to their complexity. Many people aren’t aware of their importance or the various types of collars available. This shaft collar guide will provide detailed information to help you find the right shaft collar for your specific application.
The surface treatment of the shaft collar is another important factor that contributes to its holding power. The most common treatment is a black oxide finish. This finish enhances screw torque while preserving the frictional properties of the bore. This finish can be further optimized by applying light oil to the screw. Zinc plating is also a good option for shaft collars. This material offers better corrosion resistance, but can reduce holding power.

Clamp style

A clamp style shaft collar is a simple and effective tool for securing shafts in machine tools. Its two-piece design allows for quick and easy positioning adjustments and has greater holding power than set screw collars. In addition, its friction-based connection maintains ease of use and prevents shaft damage. This type of collar is also more corrosion resistant than set screw collars.
There are several different types of shaft collars, including single and double split collars. Single-piece clamp collars are anchored into the shaft with a single tangential screw, whereas double-piece collars are anchored to the shaft with two socket cap screws. The latter type provides more stability and axial holding power and is suitable for rotating assemblies. A single or double-piece clamp collar can also be threaded to allow for precise positioning along the shaft. Its internal threads also provide enhanced support for high axial loads and act as a positive mechanical stop.
There are different types of shaft collars, each with its own set of advantages and disadvantages. A set-screw collar may be preferred over a clamp-style shaft collar, but it’s not the only choice. A set-screw collar can severely mar the shaft and can prevent fine adjustments. However, it is a good idea to use the torque wrench when tightening a shaft collar.

Zinc plated

Zinc plated shaft collars are available in a variety of sizes. They are precision machined from cold finished steel bar stock and zinc plated for corrosion resistance. They are also very attractive. They are made in the USA. Whether you need a zinc-plated shaft collar for a simple repair or a more complicated installation, Lovejoy has the right solution for your needs.
The CZPT MSP-12-FZ two-piece shaft collar has a 12mm bore, 28mm OD, and 11mm width. Its clamp style design allows you to easily install and remove the shaft collar. It is easily adjustable and is stamped with the CZPT name.

editor by czh 2022-12-25