China Keyless Shaft Hub Locking Device Pl 060X090 as-Ss shaft collar coupling

Product Description

CZPT Keyless Locking Devices are utilised in rotating equipment,  creating clamping stress among area of locking device and shaft to produce adjustable and releasable mechanical relationship,  so as to clamp gears,  pulleys and other elements to a shaft with out threads or keys.

 
Raw materials accessible in:
l   Steel C45E,
l   Steel 42CrMo4V
l   Stainless Steel AISI431,
l  Stainless Metal AISI304
 
Attributes:
one. Join hubs solidly to shafts
2. Effortless set up and disassembly
three. Large torque transmission
four. Lengthy life span and effortless maintenance
5. Low notching impact
6. Reduction of put on and tear of costly device parts

Ubet Machinery provides varieties of Keyless Locking Products,  which are interchangeable with many European and American manufacturers.  Higher good quality usually arrives the first.

Ubet Keyless Locking Unit KLD-1 Medium torque,  not self-centering, Medium area pressures, No axial hub movement, flexible use, machining tolerance shaft H8, hub H8 socket head locking screw DIN912-twelve.9. The most well-known kind of all KLD Locking Gadget, CZPT Link the slotted design of the double tapered rings allows comparatively higher mounting tolerance, The big taper angles are not self-locking and facilitate the launch of the relationship.

KLD-1 Interchange with Z2,BIKON 4000,BEA BK40,BONFIX CCE2000,Challenge 01,Chiaravalli RCK40,CONEX  A, Fenlock FLK200,ITALBLOCK CN210,KTR100,KINLOK LOK30,KBS40,KANA 200,MAV 2005,POGGI CAL-A,RFN7012,Ringspann RLK200,Ringblok 1120,SIT 1,SATI KLGG,TOLLOK TLK200,Tsubaki AS,TAS3571,V-Blok VK400,Walther CZPT MLC 1000,Fenner Generate B-Loc B400,LoveJoy SLD1500,OKBS40,DRIVELOCK40  

Ubet Keyless Locking Assembly KLD-2 Medium torque, self-centering, little cross part, machining tolerance shaft H8, hub H8 Socket head locking screw DIN912-12.9
Self-centering with superb concentricity the small outer diameter is place-saving and ideal for modest wheel diameters the spacer ring amongst the outer flange and the hub maintains the fitting place in the axial direction to enable precise positioning without a shaft collar the push-off threads in the outer flanges are utilised for dismantling.
 
KLD-2 Interchange with Z11,BIKON 8000,BEA BK80,BONFIX CCE1000,Obstacle 02,Chiaravalli RCK80,CONEX  B,7110 ECOLOC, Fenlock FLK110,GERWAH PSV2571.1,ITALBLOCK CN55,KTR250,KINLOK LOK10,KBS80,MAV 5061,POGGI CAL-B,RFN7110,Ringspann RLK110,Ringblok 1100,SIT 3,SATI KLCC,TOLLOK TLK110,Tsubaki TF,V-Blok VB800B,Walther CZPT MLC3000,Fenner Push B-Loc B800,LoveJoy SLD1900,OKBS80,DRIVELOCK80

Ubet Locking Components KLD-three
Low torque, Medium area force, Taper rings only, Low axial and radial proportions
This clamping set is self-centering with outstanding concentricity. The very small outer diameter is area-saving and appropriate for modest wheel diameters. The spacer ring among the outer flange and the hub maintains the fitting situation in the axial path to allow exact positioning without having a shaft collar. The drive-off threads in the outer flanges are utilized for dismantling.
 
 KLD-3 Interchange with Z1,BIKON 5000,BEA BK50,BONFIX CCE3000,Obstacle 03 Chiaravalli RCK50,CONEX  C,Fenlock FLK300,ITALBLOCK CN31,KRT150,KINLOK LOK80,KBS50,KANA three hundred,MAV 3003,POGGI CAL-C,RFN8006,Ringspann RLK300,Ringblok 1060,SIT 2,SATI KLNN,TOLLOK TLK300,Tsubaki EL, ,Walther CZPT MLC 2000,Fenner Generate B-Loc B112,LoveJoy SLD350,OKBS50,DRIVELOCK50
 
Ubet Mechanical Locking Gadget KLD-four
Substantial torque, self-centering, medium surface area strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
 
KLD-4 Interchange with Z3,BIKON 7000A,BEA BK70,BONFIX CCE4000,Challenge 04,Chiaravalli RCK70,CONEX  D,7004 ECOLOC, Fenlock FLK130,GERWAH PSV2007,ITALBLOCK CN54/N,KTR200,KINLOK LOK20A,KBS70,MAV 6901,POGGI CAL-D,RFN7013.,Ringspann RLK130,Ringblok 1300.1,SIT 5A,SATI KLDA,TOLLOK TLK130,V-Blok VK700,OKBS70,DRIVELOCK70
 
Ubet Shaft Hub Link KLD-five
Medium torque, diminished length, medium self-centering, Substantial area force, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
Suitable for narrow, disk-formed wheel hubs. Self-centering and self-locking in the clamping point out.
 
KLD-5 Interchange with Z3B,BIKON 1003,BEA BK13,BONFIX CCE4100,Obstacle 05,Chiaravalli RCK13,CONEX  DS,7003 ECOLOC, Fenlock FLK132,GERWAH PSV2006,KTR203,KBS13,KANA 201,MAV 1062,POGGI CAL-DS,RFN7013., Ringspann RLK132,Ringblok 1710,SIT 6,SATI KLAA,TOLLOK TLK132,TAS3003, V-Blok VK160,Walther CZPT MLC 5006,LoveJoy SLD1750, OKBS13, DRIVELOCK13.
 
Ubet Shaft Locking Gadget KLD-6
Medium torque, self-centering, Minimal floor strain, No axial hub motion, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
 KLD-6 Interchange with Z13,BIKON 7000B,BEA BK71,BONFIX CCE4500,Obstacle 06,Chiaravalli RCK71,CONEX  E,7007 ECOLOC, Fenlock FLK131,GERWAH PSV2007.3,ITALBLOCK CN54/S,KTR201,KINLOK LOK20B,KBS71,MAV 6902,POGGI CAL-E,RFN7013.1,Ringspann RLK131,Ringblok 1300.2,SIT 5B,SATI KLDB,TOLLOK TLK131,Tsubaki KE,V-Blok VK700.1,Walther CZPT MLC5000B,OKBS71,DRIVELOCK71
 
Ubet Clamping Electricity Lock KLD-7
Medium torque, decreased length, Substantial surface area stress, No axial hub movement, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9 Simultaneous Link of Chain Sprocket
 
 KLD-7 Interchange with Z8,BIKON 1006,BEA BK16,BONFIX CCE4600,Problem 07,Chiaravalli RCK16,CONEX  ES,7006 ECOLOC,Fenlock FLK133,GERWAH PSV2006.3,ITALBLOCK CN9/4,KTR206,KBS16,KANA 201,MAV 1061,POGGI CAL-ES,RFN7013.1,Ringspann RLK133,Ringblok 1720,SATI KLAB,TOLLOK TLK133,Tsubaki AE,TAS3006,V-Blok VK130,Walther CZPT MLC 5007,LoveJoy SLD1750,OKBS16,DRIVELOCK16
 
Ubet Shrink Disc KLD-fourteen
Higher torque, No axial hub motion, Substantial speed application, preferred answer for coupling hub and hollow shaft gearbox, DIN931-ten.9 screw Intelligent-Lock Shrink Disc, Narrow Hub Link for sprockets, hook up hollow and CZPT shafts frictionally and backlash-free of charge.
 
KLD-14 Interchange with Z7B,BEA BK19,BONFIX CCE8000,Problem fourteen,Chiaravalli RCK19,CONEX  SD, Fenlock FLK603, ,KTR603,KBS19,MAV 2008,RFN4071,Ringspann RLK603,Ringblok 2200,SATI KLDD,TOLLOK TLK603, Tsubaki SL, ,Walther CZPT MLC 9050,Fenner Drive B-Loc SD10,LoveJoy SLD900,OKBS19,DRIVELOCK19
 
Ubet Locking Assembly KLD-15
High torque, self-centering, Low-medium surface pressure, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
 
KLD-15 Interchange with BEA BK15, Problem fifteen,Chiaravalli RCK15,CONEX  EP, Fenlock FLK134,KBS15 ,MAV 3061,Ringspann RLK134,SATI KLBB,TOLLOK TLK134,DRIVELOCK15
 
 
Ubet Locking Bushes KLD-16
Medium torque, Diminished length, Medium self-centering, Large surface pressure, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
 
 KLD-16 Interchange with BONFIX CCE4900,Problem sixteen,CONEX  L,KTR225,KBS52,SATI KLHH
 
 
Ubet Ball Bearing Adapter Sleeve KLD-seventeen
Reduced torque, Short Length, Not self-centering, Low surface area strain, machining tolerance shaft H8, hub H8 
 KLD-17 Interchange with BEA BK25, Problem seventeen, KBS51, SATI KLFC
 
Ubet Bearing Adapter Sleeve  KLD-17.1
Lower-medium torque, self-centering, low floor force, machining tolerance shaft H8, hub H8
 
KLD-seventeen.1 Interchange with Z19B, BEA BK26,Challenge 21,Chiaravalli RCK55, Fenlock FLK250,KTR125,KBS55, POGGI CAL-L,Ringspann RLK250,Ringblok 1500, SATI KLFF,TOLLOK TLK250
 
Ubet Shaft Clamping Collar KLD-18
Minimal-medium torque, Limited Duration, self-centering, minimal area strain, machining tolerance shaft H8, hub H8, socket head Locking screw DIN912-12.9
This clamping established is self-centering and suited for very small shaft diameters.     It transfers typical to large torques
 
KLD-18   Interchange with BEA BK61,Chiaravalli RCK61,7002 ECOLOC ,GERWAH PSV2061,KTR105,KBS61,MAV 7903,SATI KLSS, Walther CZPT MLC 5050,OKBS61,DRIVELOCK61
 
Ubet Clamping Unit KLD-19
very large torque, self-centering, medium surface stress, no axial hub movement, machining tolerance shaft H8, hub H8,  socket head Locking screw DIN912-twelve.nine
This clamping established is self-centering with exceptional concentricity. The extremely small outer diameter is room-conserving and appropriate for modest wheel diameters. The spacer ring amongst the outer flange and the hub maintains the fitting place in the axial path to empower precise positioning without having a shaft collar.
 
KLD-19 Interchange with Z12A,BIKON 1012,BEA BK11,BONFIX CCE9500,Obstacle 19,Chiaravalli RCK11,CONEX  F,7005 ECOLOC,Fenlock FLK400,GERWAH PSV2005,ITALBLOCK CN911,KTR400,KINLOK LOK40,KBS11,MAV 4061,POGGI CAL-F,RFN7015,Ringspann RLK400,Ringblok 1800,SIT 4,SATI KLEE,TOLLOK TLK400,Tsubaki Advert,TAS3012,V-Blok VK112,Walther CZPT MLC 4000/MLC 7000,Fenner Push B-Loc B112,LoveJoy SLD2600,OKBS11,DRIVELOCK11
 
Locking Gadget KLD-33 interchange with Z4, RFN7014

Locking Unit KLD-34 interchange with  Z5,BIKON 1015./1015.1, 7009 ECOLOC,Fenlock ,GERWAH PSV2009, KTR401,MAV 1008,RFN7015.,Ringspann RLK401,Ringblok 1810,TOLLOK TLK451,TAS3015./3015.1,
 
Keyless Locking Device also phone as under
1.     Welle-Nabe-Verbindungen
2.     Wellenspannsaetze,
3.     Spannsaetze, 
four.     Taper Spannbuchsen,
5.     Taper Lock, 
6.     Keyless Locking System,
7.     Keyless Locking  Assembly,
eight.     Keyless Shaft Locking Gadget,
9.     Keyless Shaft Hub Locking Gadget,
ten.  Keyless Bushings,
11.  Keyless Shaft Hub Relationship,
12.  Clamping Sleeve,
13.  Clamping Factor,
fourteen.  Clamping Collar,
15.  Clamping Bush,
sixteen.  Clamping Products,
seventeen.  Clamping Set,
eighteen.  Clamping Electrical power Lock,
19.  Cone Clamping Factor,
twenty.  Shaft Clamping,
21.  Shaft Correcting,
22.  Shaft Repairing Cone Clamping Aspect, 
23.  Conical clamping rings, 
24.  Shaft Lock Clamping Component,
twenty five.  Shaft Clamping Aspect,
26.  Shaft Clamping Collar,
27.  Shaft Locking System,
28.  Shaft Hub Link,
29.  Shaft Hub Locking Device,
thirty.  Shaft Hub Locking Assembly,
31.  Shaft Lock,
32.  Silted Clamping Element,
33.  Shaftlock Clamping Element,
34.  Locking Assembly,
35.  Locking Bushes,
36.  Locking Rings,
37.  Rigid Shaft Coupling,
38.  Rigid Shaft Coupler,
39.  Rigid Ring Block,
forty.  Ring Shaft Lock, 
forty one.  Ringblock Locking Assemblies,
42.  CZPT Relationship,
forty three.  Zinc Plated Locking Gadgets, 
44.  Nickel Plated Locking Assembly,
45.  Mechanical Locking Gadget, 
forty six.  Mechanical shaft lock,
47.  Schrumpfscheibe,
forty eight.   External Locking Assembly,
forty nine.  Narrow Hub Relationship for Sprockets,
fifty.  Shrink Disc, 
51.  Brake Disc, 
52.  Shrink Disk,
fifty three.  External Locking Assembly Light Duty, 
fifty four.  Shrink Discs Normal Responsibility, 
fifty five.  Shrink Disks Hefty Obligation, 
56.  Intelligent-Lock Schrumpfscheibe, 
fifty seven.  Wise-Lock Shrink Disc, 
58.  Bearing Adapter Sleeve, 
fifty nine.  Lock Nut,
sixty.  Electrical power NUT, 
sixty one.  Energy Url, 
sixty two.  Shaft Self-Lock Ring Nut, 
63.  Nickel Plated Locking Units,  
sixty four.  Zinc Plated Locking units, 
sixty five.  Stainless Metal Locking Products.

KLD interchange table with other makes
 

###

###

###

###

What Is a Shaft Collar?

A shaft collar is a simple machine component, but its function is important in many power transmission applications. Most commonly, shaft collars are used in motors and gearboxes. They can act as locating components, bearing faces, and mechanical stops. Their compact design makes them easy to install. In addition, they provide a clean, simple look for your gearbox or motor.

Sizes

There are a variety of sizes of shaft collars. Each type has different parameters and requirements. These specifications can be found on the manufacturer’s website. These dimensions are important for the selection process. In order to determine which size is best for your needs, first identify the system parameters and limitations that you’ll be using.
Shaft collars are available in a variety of sizes and materials. These pieces can range in thickness from just a few millimeters to several inches. A solid steel shaft collar is usually available from 1/8″ to six inches. The material used for shaft collars is either 304 stainless steel or lead-free steel.
The oldest style of shaft collar is the set collar, which uses a hardened set screw to penetrate the shaft surface. It is ideal for holding bearings, spacers, and sprocket hubs. These collars are typically installed using hex keys, which are six-sided L-shaped tools, also known as Allen Wrenches. These collars are useful for many different machine applications, and are often used in conjunction with springs and dampers to hold components in place. They are also useful as mechanical stops, stroke limiters, and bearing holders.
Shaft collars come in one-piece and two-piece designs. A one-piece collar provides uniform holding force on the shaft, whereas a two-piece shaft collar is stronger and can be assembled anywhere on the shaft. Shaft collars are generally available in English and metric units, and the manufacturer can alter the dimensions of any standard collar to meet your needs. For more unique situations, you can also choose a fully customized shaft collar that is specific to your application.

Functions

A shaft collar is a metal or plastic device used to locate and position components on a shaft. It also limits the movement of the shaft. These devices can be found on a wide variety of applications, including motor assembly components. There are many types of shaft collars. To help you find the right shaft collar for your application, you can use Thomas Supplier Discovery Platform. The platform has over 70,000 product categories to help you find the right solution.
Clamp-type collars are reliable under constant loads, but may require additional support under shock loads. A shock load is a force generated by a relatively small mass that is rapidly increased by impact. Clamp-style collars are designed to counteract this force, and an undercut on the shaft may help them stay firmly in place. Clamp-style collars are also available in two-piece designs, which offer a high holding force and ease of assembly.
A shaft collar is an important machine component. It holds and positions sprockets on a shaft. It also acts as a mechanical stop, and helps prevent a shaft from slipping. They can also be used to limit the movement of cylinders and actuators. These simple components are found in virtually every type of machinery.
The torque-generating force in a set-screw shaft collar is absorbed by friction between the threads and the clamp body. The friction between these parts helps compensate for the lost torsioning effort, which can lead to the collar failing to hold. Alternatively, a torque wrench can help control the final torque of the shaft collar.

Types

There are many different types of shaft collars available for different applications. It is important to understand the characteristics of each to find the right one for your application. The most common shaft collars are made from steel or aluminum, but some are also made of plastic. These are relatively inexpensive and lightweight, but their holding power is limited. Titanium shaft collars are much lighter than aluminum and are resistant to extreme temperatures, but they are only used in a few specific applications.
Another type is a clamp collar, which is mounted using a compression method. Compared to the set screw type, clamp collars are much stronger and have a higher holding power. Clamp collars come in either a one-piece or two-piece design. One-piece collars are used in applications where the shaft is split and requires a positive stop.
The strength of a shaft collar depends on the type of screw used to attach it to the shaft. The screw’s strength and diameter will affect the holding power of the shaft collar. In most cases, a manufacturer will offer the proper screw with the collar. In some cases, however, a non-standard screw may be more appropriate.
The set screw collar is one of the oldest types. Its disadvantage is that it can be difficult to move and may damage the shaft. Also, it is not as secure as a clamp-based collar. In addition, two-piece hinged shaft collars are the most convenient. One-piece collars are difficult to move, while two-piece collars can be moved easily along the shaft without separating components.

Dimensions

Shaft collars are a complex component and their dimensions are crucial to the performance of the application. Designing a shaft collar requires consideration of a variety of factors, such as the type of material, bore size and geometry of the shaft. The manufacturer of a shaft collar will usually publish performance data on its website, or users can contact them for assistance.
The material used in shaft collars has a significant impact on the collar’s strength and its holding capacity. Shaft collars should be made from a high-quality, corrosion-resistant material. The strength of the screw also plays an important role in the collar’s holding capacity. Generally, a collar’s manufacturer will provide the appropriate type of screw for the application. However, in some cases, a non-standard screw may be necessary.
Shaft collars are available in a variety of styles. One-piece collars are often used in applications where there is minimal or no disassembly or adjustment required. Alternatively, two-piece collars may be used when frequent disassembly is needed. Regardless of the style, the size of shaft collars should be consistent with the requirements of the assembly.
Shaft collars are made from steel or aluminum. They offer good holding power and are lightweight. Steel shaft collars are durable and have good corrosion resistance. However, the grade of steel can affect their performance. Stainless steel collars are easier to machine and have improved corrosion resistance. However, they may reduce the holding power.

Stainless steel

A stainless steel shaft collar is a simple mechanical component used to secure a shaft. It is used for many different applications, most commonly in motors and gearboxes. They also function as locating components, mechanical stops, and bearing faces. These collars are available in different sizes and can be used for a variety of different purposes.
Shaft collars come in various materials, including stainless steel, aluminum, and polyamide. They are available with a variety of different finishes, including electroless nickel plating. Stainless steel shaft collars are available in various diameters, including 5/16 in. through 5/8 in. They are also available in single and double split styles.
CZPT offers a full line of stainless steel shaft collars in both 303 and 316 stainless steel. These collars are resistant to corrosion caused by water and a wide variety of commercial-grade cleaning agents. They are also supplied with fastening hardware of similar material. For added durability, CZPT shaft collars are also available in engineered plastic.
Stainless steel shaft collars can be easily adjusted for the proper torque. They come in various sizes and are easy to install and remove. They can also be re-bored if necessary. One type of shaft collar is quick-clamp, which is equipped with a clamping lever and a handle. It’s ideal for frequent setup and adjustment.

Quick-clamp shaft collars

Quick-clamp shaft collars are a simple and convenient way to secure a shaft. They have a flush handle that sits flush with the outside diameter of the shaft and can be easily adjusted by hand. They are made from lightweight aluminum and stainless steel hardware that does not mar the shaft.
These shaft collars replace standard hardware and are easy to install and remove. Quick-clamp shaft collars are available in one, two, and three-piece clamping styles. Some quick-clamp shaft collars have an integrated hinge and countersunk mounting holes for easy mounting. They can also have a knurled nut for easier locating.
Quick-clamp shaft collars are a convenient option for many types of packaging machinery. They can be installed and adjusted with no tools, making them an efficient choice for frequent changeovers and setups. CZPT offers two types of quick-clamp shaft collars. The first type has a cam lever that sits flush with the outside diameter and is finger operated. The second type has an adjustable tension-adjustment screw for easy adjustment. Both designs are ideal for low-rpm applications where frequent changeovers are needed.
Quick-clamp shaft collars are made of black anodized aluminum and steel fasteners. These shaft collars are available in sizes ranging from 0-300mm and in various designs. A quick-clamp shaft collar has a high load-bearing capacity, and a high torque capacity. Axial load capacities and torque specifications are non-binding guidance values and do not represent a warranty or guarantee of their characteristics.

editor by CX 2023-03-28